Acest website foloseste cookie-uri proprii, cat si cookie-uri adaugate de terti pentru a va furniza o experienta mult mai buna de navigare si servicii adaptate nevoilor si interesului dvs. Mai multe informatii: Declaratia de protectie a datelor.

Produse Meniu
Limba
Hungarian hu
English en
Romanian ro

Tuner antena

Tuner antena
Sortare după:
In stoc
62,03 EUR
Cod articol: FT METER
LDG FT METER 6 function meter for Yaesu FT-857, FT-897 transceivers.
In stoc
93,04 EUR
Cod articol: FTL METER
LDG Electronics function FTL meter, 6 function for Yaesu FT-857, FT-897 transceivers.
In stoc
134,38 EUR
Cod articol: Z-817
LDG Electronics Z-817QRP 0.1-20 W AUTOTUNER FOR YAESU FT-817, FT-818 RADIO.
In stoc
143,72 EUR
Cod articol: M-1000
LDG M-1000 4.5" METER w/ 6ft cable for LDG AT-1000Pro II antenna tuners.
Disponibil la comanda
186,08 EUR
Cod articol: Z-11PROII
LDG Z-11PROII 0.1 TO 125 WATT MEMORY AUTOTUNER, 1.8-54 MHz for Yaesu FT-100,857,897,450,991,991A,950,1200,3000 transceiversThe LDG Z-11ProII is a small, low-cost automatic tuner suitable for any amateur purpose, whether base, mobile or portable. It handles up to 125 watts SSB or CW but requires only 0.1 watts to tune, making it ideal for QRP operation.
Evaluare medie: 5 din 5 stele !
In stoc
206,73 EUR
Cod articol: AT-897PLUS
LDG AT-897 PLUS BOLT-ON MEMORY AUTOTUNER FOR YAESU FT-897, FT-857 TRANSCEIVERS. The LDG AT-897Plus provides semi-automatic antenna tuning across the entire HF spectrum plus 6 meters, at power levels up to 125 watts. It will tune dipoles, verticals, Yagis, or virtually any coax-fed antenna. It will match an amazing range of antennas and impedances, far greater than some other tuners you may have considered, including the built-in tuners on many radios.
Evaluare medie: 5 din 5 stele !
Disponibil la comanda
207,76 EUR
Cod articol: IT-100
The LDG IT-100 is an automatic tuner intended for use with modern Icom transceivers. It works with any Icom transceiver that supports an AH-3 or AH-4 Icom tuner; apartial list of compatible units includes: IC-706, 703, 718, 7000, 7100, 7200, 7300, 7410, 746, 756, 7600, 7610. The interface cable is included. The IT-100 connects to the radio via its Tuner jack to control the tuning cycle; the transceiver's Tune button controls the tuner. The Tuner jack also powers the tuner, so it requires no external power supply. Since the IT-100 is matched to your specific rig, you just press the Tune button on the radio, and the rig and tuner do the rest: reduces power, transmits a carrier, automatically matches the antenna to the rig, then restores the original power and mode.
Disponibil la comanda
230,82 EUR
Cod articol: KT-100
The LDG KT-100 is an automatic tuner intended for use with modern Kenwood transceivers. It works with any Kenwood transceiver that supports the AT-300 Kenwood tuner (no longer available). A partial list of compatible units includes: TS-2000, 50, 450, 480SAT (not HX), 570, 590, 850, 870, 990 (and all variants). The interface cable is included.
In stoc
230,82 EUR
Cod articol: YT-100
LDG Electronics YT-100 AUTO TUNER FOR YAESU FT-857, FT-897, FT-100 RADIOS.
Disponibil la comanda
237,78 EUR
Cod articol: AT-100PROII

LDG AT-100PROII 1-125 W destop memory tuner (YAESU, ICOM, KENWOOD). The LDG AT-100ProII is the next step in the evolution of the automatic tuner. This desktop tuner covers all frequencies from 1.8 – 54 MHz, and will automatically match your antenna in no time. Updated features include an LED indicator for antenna selection and an LED to indicate when in bypass.  It features a two-position antenna switch, allowing you to switch instantly between two antennas. The AT-100ProII requires just 1 watt for operation, but will handle up to 125 watts, making it suitable for everything from QRP to a typical 100 watt transceiver. The AT-100ProII includes 2,000 memories for each antenna, automatically storing tuning configurations for each frequency and band as you use them. Frequency sensing circuitry lets the AT-100ProII “know” your operating band and frequency. Whenever you transmit on or near a frequency you’ve used before, the AT-100ProII can retune from memory almost instantly. Rugged and easy-to-read LED bargraphs show power and SWR, and a Function key on the front panel allows you to access data like mode and status. The AT-100ProII uses latching relays which retain the tuned configuration indefinitely even when powered down. 

Evaluare medie: 5 din 5 stele !
In stoc
238,22 EUR
Cod articol: FC-50
Yaesu FC-50 TUNER ANTENA automatic pentru Yaesu FT-891.  Include cablul de control (1.6 foot) si cablul coaxial jumper (1.6 foot). Acesoriu care permite atasarea fizica la FT-891, inclus.
In stoc
245,58 EUR
Cod articol: AAD77X013

Yaesu FC-40 automatic external tuner 100W for Yaesu FT-857, FT-897 radios.  The Yaesu FC-30 includes a cooling fan to ensure thermal stability of the critical matching elements within its compact case. 

In stoc
247,78 EUR
Cod articol: AAC86X013

Yaesu FC-30 antenna tuner for Yaesu FT-857, FT-897 radios. The Yaesu FC-30 includes a cooling fan to ensure thermal stability of the critical matching elements within its compact case. 

In stoc
258,43 EUR
Cod articol: RT-100

The LDG RT-100 is an automatic tuner intended for outdoor mounting at or near the antenna feedpoint, minimizing SWR losses in the transmission line. It handles up to 125 watts on SSB and CW. The RT-100 is weatherproof, and is powered over the coaxial cable via the included RC-100 remote controller/Bias-T. The RT-100 will automatically tune when the SWR exceeds a preset limit. You can also manually begin a tuning cycle or bypass the tuner from the RT-100 remote. DC power for the tuner is applied to the RT-100 near the operating position and transferred to the tuner over the coax.

Evaluare medie: 5 din 5 stele !
In stoc
268,79 EUR
Cod articol: AT-200PROII
LDG AT-200PROII desktop memory tuner. 5-250W, 1.8-54 MHz (YAESU, ICOM). Time was, 100 watts was a lot of power. Today, more and more transceivers feature 200 watts output. Even though many of these modern radios feature a built-in tuner, it’s range and features are usually quite limited; if you need a tuner, you probably need a better one than they built into the radio. The LDG AT-200ProII is designed for this new generation of rig. It's specifically recommended for Ten-Tec and tube radios. Many QRP operators have a small 100-150 watt amplifier for times when you need a few more S-units. The AT-200II is ideal for this kind of operation; it’s minimum required power is only 5 watts, but it will handle the higher power as well. The AT-200II will handle up to 250 watts SSB or CW on 1.8 – 30 MHz, and 100 watts on 54 MHz. It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-200ProII with longwires, random wires and antennas fed with ladder line with the optional LDG balun. 
Evaluare medie: 5 din 5 stele !
In stoc
286,70 EUR
Cod articol: YT-1200
LDG YT-1200 desktop tuner for Yaesu FT-450, 950, 991, 1200, 3000 amateur destop radios.
 
Disponibil la comanda
382,48 EUR
Cod articol: AT-600PROII
LDG AT-600PROII 5-600 W desktop memory tuner for Icom and Yaesu FT-100,857,897,450,991,950,1200,2000,3000,5000 transceivers. The LDG AT-600ProII is a general purpose automatic tuner intended for use with midsize amplifiers with up to 600 watts output on SSB or CW. Like all LDG tuners the AT-600ProII operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. To protect its circuitry it will not tune at power levels above 150 watts; you simply bypass your amplifier (or place it in Standby) to complete a tuning cycle using only the exciter. The AT-600ProII also features LDG's advanced memory tuning, providing 2,000 memory locations; when tuning near a previously used frequency it will recall the settings for nearly instant tuning. It learns your favorite frequencies and bands as you use it. You can also start a tuning cycle manually whenever necessary.
Disponibil la comanda
465,20 EUR
Cod articol: RT-600
The LDG RT-600 is an automatic tuner with RC-100 control unit, intended for outdoor mounting at or near the antenna feedpoint, minimizing SWR losses in the transmission line. It handles up to 600 watts on SSB and CW. The RT-600 is weatherproof, and is powered over the coaxial cable via the included RC-100 remote controller/Bias-T. The RT-600 will automatically tune when the SWR exceeds a preset limit. You can also manually begin a tuning cycle or bypass the tuner from the RT-600 remote. DC power for the tuner is applied to the RT-600 near the operating position and transferred to the tuner over the coax. Compatible with Yaesu FT-100, 857, 897, 450, 991, 991A, 1200, 3000 amateur transceivers.
In stoc
558,24 EUR
Cod articol: AT-1000PROII
Building on the success of the AT-1000Pro, LDG Electronics has refined and expanded its flagship 1KW tuner. The new AT-1000ProII keeps many of the same features of the previous model, but simplifies the operation. With the two position antenna switch there are 2,000 memories that store tuning parameters for almost instantaneous memory recall whenever you transmit on or near a frequency you’ve used before. Just key and it tunes! The AT-1000PROII will operate at any power level between 5 and 1,000 watts peak RF input.
Evaluare medie: 5 din 5 stele !