Vertex Standard EVX-R70-D0-45 (CE) VHF 136-174MHz 25-45W REPEATER
|
Descriere
Vertex Standard EVX-R70-D0-45 (CE) VHF 136-174MHz 25-45W REPEATER
Evolve to Better Communication and Value! You can aff ord to enhance your communications with the digital performance of eVerge™ two-way radios. eVerge™ radios are precisionengineered to deliver value without sacrifi cing quality — giving you more capabilities and the fl exibility you need to communicate at your best.
Better Flexible Support: Analogue, Digital and Mixed Modes
The EVX-R70 conventional repeater operates in both analogue and digital modes and can be used with any existing analogue two-way radios. Includes “mixed mode” to dynamically switch between analogue and digital for fl exible support.
Better Compatibility and Effi ciency
eVerge™ radios are compatible with over 74% of the digital radios deployed worldwide using TDMA protocol. eVerge™ digital radios operate with the TDMA (Time Division Multiple Access) protocol for spectrum and power effi ciency providing lower total equipment cost compared to FDMA. TDMA digital radio systems support twice as many talk groups and calls without more licensing costs.
Continuous Performance
Get 100% continuous duty at 45 Watt VHF and 40 Watt UHF for easy integration into most repeater sites. Includes integrated power supply with connector for optional external DC battery backup.
Multicolored LED Status Indicator
LED indicator enables easy monitoring of repeater status. Status indicators include: power, digital/analogue mode, repeater disabled, transmit analogue/digital mode by slot, and receive analogue/ digital mode by slot.
Additional Features
EIA Rack mount size
AMBE+2™ Digital vocoder
26-Pin accessory connector
Accessories
MH-67A8J: Standard microphone
MH-12A8J: Desktop microphone
WMB-1: Wall mount kit
E-DC-29: Battery back-up cable
EVX-R70 Specifications
General Specifications
Frequency Range VHF: 136 - 174 MHz UHF: 403 – 470 MHz
450 – 527 MHz
Number of Channels and Groups 16
Power Supply Voltage 100 - 240 V AC (13.5 V DC)
Channel Spacing 25 kHz / 12.5 kHz
Current Consumption
Standby: 1 A (1 A DC typical)
TX Low Power: 3 A (7.5 A DC typical)
TX High Power: 4 A (12 A DC typical)
Operating Temperature Range -30º C to +60º C
Storage Temperature Range -40° C to + 85° C
Frequency Stability ±0.5 ppm
Duty Cycle 100%
Dimension (H x W x D) 132.6 x 482.6 x 296.5 mm
Weight (Approx.) 14 (kg
Receiver Specifi cations measured with ETSI EN 300
Sensitivity
Analogue 12 db SINAD: 0.3 μV 0.22 μV typical
Digital 5% BER: 0.3 μV
Adjacent Channel Selectivity
VHF: ETSI EN 300 65 dB @ 12.5 kHz,
80 dB @ 25 kHz*
ETSI EN 300 50 dB @ 12.5 kHz,
80 dB @ 25 kHz*
UHF: ETSI EN 300 65 dB @ 12.5 kHz,
75 dB @ 25 kHz*
ETSI EN 300 50 dB @ 12.5 kHz,
75 dB @ 25 kHz*
Intermodulation VHF: 78 dB UHF: 75 dB
Spurious Rejection VHF: 80 dB UHF: 75 dB
Audio Distortion 3% (typical)
Hum and Noise -40 dB @ 12.5 kHz; -45 dB @ 25 kHz*
Conducted Spurious Emission -57 dBm
Transmitter Specifi cations measured with ETSI EN 300
Output Power
VHF: 1 - 25 W, 25 - 45 W UHF: 403 - 470 MHz: 1-25 W, 25-40 W
450 - 527 MHz: 1 - 40 W
Emission Designator
(Analogue)
16K0F3E / 11K0F3E
Modulation Limiting
(136 - 174 MHz, 403 - 470 MHz)
± 2.5 kHz @ 12.5 kHz ; ± 5.0 kHz @ 25 kHz
Conducted Spurious Emission
(136 - 174 MHz, 403 - 470 MHz)
-36 dBm < 1 GHz ; -30 dBm > 1GHz
FM Hum and Noise
(136 - 174 MHz, 403 - 470 MHz)
-40 dB @ 12.5 kHz ; -45 dB @ 25 kHz
Adjacent Channel Power
(136 - 174 MHz, 403 - 470 MHz)
60 dB @ 12.5 KHz; 70 dB @ 25 kHz
Audio Distortion 3%
FM Modulation
12.5 kHz: 11K0F3E
25 kHz: 16K0F3E
4FSK Digital Modulation
12.5 Khz Data Only: 7K60FXD
12.4 kHz Data and Voice: 7K60FXE
Digital Protocol ETSI TS 102 361-1, -2, -3
Specifi cations are subject to change without notice or obligation.
VERTEX STANDARD is a trademark of Vertex Standard LMR, Inc. All other trademarks are the property of their respective owners.